Fits a DyzExtruder GT and a DyzEnd Pro. Should fit other Dyze extruders and hotends, but I haven't tested it against them.
Requires two countersunk M3 bolts, 10mm should be enough but you can go up to 15mm. For the Ender 6, the third bolt on the bottom left doesn't have to be countersunk.
Dyze says something really odd about not mounting both sides of the extruder, but in the case of this bracket I recommend bolting both sides for stability. The holes in this model are deliberately close to the back and while lining them up is tricky, it makes for a really tight mount.
I had to drill the stock fan holes with a hand drill. Dunno what size bit, we're not organized like that in my place. Something a little smaller than the diameter of the bolt.
I've included the Ender 5 and Ender 6 mounts. Creality redesigned their carriage for the E6 so the mount is different. I printed mine in nylon but you can probably get away with PETG long enough to set it up and print a nylon mount.