This is a camera mount for this type of camera. It's made to mount on this platform. Which is made to mount on the RC Tank by Staind.
This would probably be pretty easy to remake for other uses. I printed this with PLA. Print the base with support. Print the lid with the top down and NO support. You will need to clean out the holes on the lid. There are holes in the base to allow zip ties to hold the camera and transmitter in place. Use 2 - M4 x 10mm screws to hold down the base, and 2 - M4 x 20mm screws to attach the lid.
***************************************************************************
*** UPDATE ***
Added a version 2 which is shorter and locks the camera in place without the need for a zip tie.
*****************************************************************************
https://youtu.be/0_M7JiAi_28
This would probably be pretty easy to remake for other uses. I printed this with PLA. Print the base with support. Print the lid with the top down and NO support. You will need to clean out the holes on the lid. There are holes in the base to allow zip ties to hold the camera and transmitter in place. Use 2 - M4 x 10mm screws to hold down the base, and 2 - M4 x 20mm screws to attach the lid.
***************************************************************************
*** UPDATE ***
Added a version 2 which is shorter and locks the camera in place without the need for a zip tie.
*****************************************************************************
https://youtu.be/0_M7JiAi_28
